Please refer to my previous article where all the installation procedure is explained.

• Quick résumé :
• There’s no full changelog about them, but Catalyst 11.6 installer (pdf)
• Get the cheat-sheet 11.6 version
• Kernel supported up to 3.0x version
• Should be the latest version supporting 11.2
• Wrong (to my point of view) create an xorg.conf file which is unneeded if you work with /etc/xorg.conf.d/50-device.conf and have driver "fglrx&quot inside

Warning

Some instabilities could happen. In case of crash like no keyboard, mouse, and blackscreen on reboot. Try to shutdown properly your computer with the shutdown poweroff button (or remote ssh). On reboot, just add 3 at the end of grub line to restart in console mode.
Then with yast or zypper you can always remove the actual version and try the previous version available in the repos.

All credits to Sebastian Siebert (freespacer) : 11.6 article (German)

What about tumbleweed, factory?

Users have reported that version 8.861 of catalyst 11.6 compile correctly under Tumbleweed with 2.6.39 kernel and the driver is ready for kernel 3.0x, so until xorg change too much and then AMD support for the new version, installing the 11.4 version should work

For factory, I’ve build a repository (see previous article) that can be used, and fglrx build.
The new package are called SUSE121 & no more SUSEFACTORY.

Stats Numbers ?

All proudly served by openSUSE powered server! zypper dup from 11.2 to 11.4 in 45minutes last month

Please refer to my previous article where all the installation procedure is explained.

At least after a wrong 11.4 version, and a first buggy 11.5 catalyst version, the new one is finally build and ready to install from the repo. Like for 11.3 I’ve clean up all previous version which are not xpic, so everybody can easily know which drivers he has to install.
I’ve resigned all rpm with my key. And the tests made show them working.

Warning

Some instabilities have been reported. In case of crash like no keyboard, mouse, and blackscreen on reboot. Try to shutdown properly your computer with the shutdown poweroff button. On reboot, just add 3 at the end of grub line to restart in console mode.
Then with yast or zypper you can always try the previous version.

All credits to Sebastian Siebert (freespacer) : 11.5 article

What about tumbleweed, factory?

Users have reported that version 8.850 of catalyst 11.5 compile correctly under Tumbleweed with 2.6.38 kernel and the driver is ready for kernel 2.6.39, so until xorg change too much and then AMD support for the new version, installing the 11.4 version should work

For factory, I’ve build a repository (see previous article) that can be used, and fglrx build

Numbers ?

All served by openSUSE powered server!

Please refer to my previous article where all the installation procedure is explained.

I’ve clean up all previous version which are not xpic, so everybody can easily know which drivers he has to install.

All credits to Sebastian Siebert (freespacer) : 11.3 article

What about tumbleweed, factory?

Users have reported that version 8.831 of catalyst 11.3 compile correctly under Tumbleweed with 2.6.38 kernel, so until xorg change too much, installing the 11.4 version should work

For factory, I’ve build a repository (see previous article) that can be used, and fglrx build

Numbers ?

All served by openSUSE powered server!

Preambule : free software

Warning

I would notice everybody which will install these software : you will install proprietary softwares on your computer. Nobody will be able to debug them, nor help you to resolve what can be happen. That must be said !

The free future

The real future is already in place : it’s called radeon (or free-radeon), it’s fully integrated in kernel & xorg. Actually ( for openSUSE 11.4, or openSUSE 11.3 with kernel-stable + X11 obs repo ). Support for many chipset is in real progress even for the 6xxx series.
Give it a try before using the proprietary software, report any bugs you find with it. Only your contributions can help and will make a real differences. Thanks for doing that !

Unofficial but working repository

I offer for those of you that for any reasons can’t use successfully the free-radeon drivers a repository where you will find the latest fglrx/catalyst drivers following the packaging policy made avalaible by AMD.
Thanks to Sebastian Siebert ( check his blog ) to work in coordination with ati/amd and follow the catalyst packaging. His work allow us to have that driver available for openSUSE.

The quick how-to

Adding the repository

For openSUSE Factory

zypper ar -c -f -n "ATI/AMD fglrx non-official" http://linux.ioda.net/mirror/ati/openSUSE_Factory/ "ATI/AMD FGLRX"

For openSUSE 11.4

zypper ar -c -f -n "ATI/AMD fglrx non-official" http://linux.ioda.net/mirror/ati/openSUSE_11.4/ "ATI/AMD FGLRX"

For openSUSE 11.3

zypper ar -c -f -n "ATI/AMD fglrx non-official" http://linux.ioda.net/mirror/ati/openSUSE_11.3/ "ATI/AMD FGLRX"

For openSUSE 11.2

zypper ar -c -f -n "ATI/AMD fglrx non-official" http://linux.ioda.net/mirror/ati/openSUSE_11.2/ "ATI/AMD FGLRX"

Installing the driver

Nota previous version

Due to change in ati/amd way of life, it’s recommanded to completely remove any version of fglrx previously installed with a zypper rm

I can only recommand to also (as root)

# Remove old conf & stuff
rm -fr /etc/ati
# Remove any old fglrx inside kernel modules
find /lib/modules -type f -iname "fglrx.ko" -exec rm -fv {} \;

New installation

Once the repo has been added, you will certainly have to reboot to get ride off free radeon module. At boot on the grub line add
nomodeset blacklist=radeon 3
Don’t panic you will be land to a console, open it with root account to install fglrx.
Search the software you want for example under openSUSE 11.4

zypper se -s fglrx
Loading repository data...
Reading installed packages...

S | Name                  | Type    | Version | Arch   | Repository
--+-----------------------+---------+---------+--------+-----------
i | fglrx64_xpic_SUSE114  | package | 8.831-1 | x86_64 | ATI/AMD fglrx non-official  
  | fglrx64_xpic_SUSE114  | package | 8.821-1 | x86_64 | ATI/AMD fglrx non-official  
  | fglrx_xpic_SUSE114    | package | 8.831-1 | i586   | ATI/AMD fglrx non-official
  | fglrx_xpic_SUSE114    | package | 8.821-1 | i586   | ATI/AMD fglrx non-official

Starting with 8.821 (Catalyst 11.2) ATI use now xpic (full explanation)
So use that one. I’ve removed all non xpic drivers the 2 April 2011.

For a 64bits version

zypper in fglrx64_xpic_SUSE114

For a 32bits version

zypper in fglrx_xpic_SUSE114

During the installation process, all the dependencies will be added, which mostly are needed to build the kernel modules. Expect around 200MB to dowload.

Then the installer will build the module for your installed kernel.
And if there’s a kernel update, the script will automagically detect that, and will rebuild the module for the new kernel installed. (So if you find that your workstation is slow on reboot just press the esc key to see the details … )

Preparing xorg to use fglrx

Once the module is build and installed, you should have a file fglrx.conf or 50-fglrx.conf in /etc/modprobe.d

cat /etc/modprobe.d/50-fglrx.conf
blacklist radeon

Next ati recommend to use ati –initial-config but that break the auto-detect stack of xorg. So I recommend changing one line in file /etc/X11/xorg.conf.d/50-device.conf
just change driver line to driver “fglrx”
All the rest of the setup (double screen etc) will be made lately with the ati catalyst control center (command is amdcccle).
For those of you which want to have an xorg.conf file just have a look at aticonfig –help command.

Start X

If you are inside the console we start to use before just run “init 5” to start xorg, and normally you will find your normal xorg login screen (kdm, gdm, ldm, xdm).
Hit ctrl+alt+f1 to return to the console and type exit or logout or ctrl+d to close it.
then ctrl+alt+f7 to return to the xorg session.

Updates

ati/amd catalyst are release on a month basis, but this vary from 3 weeks to 8 weeks.

• Catalyst 11.2 – fglx 8.821 : 14 February 2011

References

Sebastian Siebert blog ( German ) with nice howto and problem resolution.
My previous post on the subject