Home Home > 2015 > 05 > 18 > Create an SD card for your Raspberry Pi B and B+
Sign up | Login

Deprecation notice: openSUSE Lizards user blog platform is deprecated, and will remain read only for the time being. Learn more...

Create an SD card for your Raspberry Pi B and B+

May 18th, 2015 by

Most of the projects around the Internet use Raspbian as main Raspberry Pi distro. Unfortunately, Raspbian doesn’t work for me. Minibian worked. So I serched other distros. My favourite is Arch Linux because there are plenty of programs that I need for projects, but it needs some extra steps from terminal to create the SD.

Here we’ll see how to create an SD card of openSUSE. There are plenty of information at the wiki page https://en.opensuse.org/HCL:Raspberry_Pi
. I’ll collect the information I need for projects, I’ll write next.

I used 13.1 as distro because it’s easier for me to resize the SD card.

1. Download the image (openSUSE-13.1-ARM-JeOS-raspberrypi.armv7l.raw.xz) from here:

http://download.opensuse.org/repositories/devel:/ARM:/13.1:/Contrib:/RaspberryPi/images/

decompress the image.

2. Find the device name of your card

cat /proc/partitions

usually it’s going to be /dev/mmcblk0.

and create the card (as root)

sudo dd if=openSUSE-13.1*.raw.xz of=/dev/mmcblk0 bs=4M;sync

3. Since I didn’t use a monitor (HDMI or DVI), I had to do some extra steps before boot my raspberry pi.

a. Delete the file /var/lib/YaST2/reconfig_system to start headless.
b. Resize the ext4 partition with Gparted.

4. When boot the Raspberry Pi, use the following

ssh root@IP

user: root
password: linux

Now the first command will be

zypper ref

and then update

zypper up

Both comments and pings are currently closed.

Comments are closed.